Peavey IPR2 7500 Power Amp
Dim Weight
Height
Depth
Width
Commodity Code
Short Description
PLEASE NOTE: IPR2 amplifiers are NOT designed to be powered on permanently.
Boasting a net weight of just over 7lbs on the lightest model, the groundbreaking IPR2 Series utilizes an advanced design that allows our engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. Designed with a resonant switch-mode power supply and a high-speed class-D topology that yields the highest audio resolution and efficiency available - and all at a cost that shatters the old-guard paradigm of power-amp valuation. These revolutionary power amplifiers are the only power amps to integrate Waves® MaxxBass® technology, which uses psycho-acoustics to create precise harmonic overtones that give the illusion of adding low frequencies to the mix. This technology allows sound engineers to dial more perceived low-end into a system without adding more power amps, processing, or subwoofers. Hi-pass filters on every channel remove unwanted rumble and noise, and balanced AUX and Master outputs ensure a clean noise-free signal to your powered speakers or power amplifier. MaxxBass® uses psycho-acoustics to calculate precise harmonics that are added to the original signal. When these harmonics are combined with the original signal, it creates the effect of lower, deeper frequencies. By tricking the human ear into perceiving lower frequencies that are not actually present in the output of the original signal, MaxxBass® allows the IPR2 to produce extremely powerful bass at relatively low power. The added harmonics allow smaller speakers to produce more perceived bass than they would otherwise be able to produce with traditional amplifiers.
Rated watts 2ch x 2 ohms: 4750 watts 20ms repetitive burst 3750 watts 1% THD both channels driven @ 1kHz Rated watts 2ch x 4 ohms: 2800 watts 20ms repetitive burst 2450 watts 1% THD / 2020 watts 0.15% THD, both channels @ 1kHz Rated watts 2ch x 8 ohms: 1550 watts 20ms repetitive burst 1425 watts 1% THD / 1200 watts 0.15% THD, both channels @ 1kHz Dimensions (HxWxD): 3.5" x 19" x 10.5" behind front panel, +0.6" for handle 89mm x 483mm x 267mm behind front panel, +15mm for handle Weight: 14.57lbs / 6.61kg
PLEASE NOTE: IPR2 amplifiers are NOT designed to be powered on permanently.
Boasting a net weight of just over 7lbs on the lightest model, the groundbreaking IPR2 Series utilizes an advanced design that allows our engineers to dramatically reduce weight while increasing output power, reliability, and thermal efficiency. Designed with a resonant switch-mode power supply and a high-speed class-D topology that yields the highest audio resolution and efficiency available - and all at a cost that shatters the old-guard paradigm of power-amp valuation. These revolutionary power amplifiers are the only power amps to integrate Waves® MaxxBass® technology, which uses psycho-acoustics to create precise harmonic overtones that give the illusion of adding low frequencies to the mix. This technology allows sound engineers to dial more perceived low-end into a system without adding more power amps, processing, or subwoofers. Hi-pass filters on every channel remove unwanted rumble and noise, and balanced AUX and Master outputs ensure a clean noise-free signal to your powered speakers or power amplifier. MaxxBass® uses psycho-acoustics to calculate precise harmonics that are added to the original signal. When these harmonics are combined with the original signal, it creates the effect of lower, deeper frequencies. By tricking the human ear into perceiving lower frequencies that are not actually present in the output of the original signal, MaxxBass® allows the IPR2 to produce extremely powerful bass at relatively low power. The added harmonics allow smaller speakers to produce more perceived bass than they would otherwise be able to produce with traditional amplifiers.
Rated watts 2ch x 2 ohms: 4750 watts 20ms repetitive burst 3750 watts 1% THD both channels driven @ 1kHz Rated watts 2ch x 4 ohms: 2800 watts 20ms repetitive burst 2450 watts 1% THD / 2020 watts 0.15% THD, both channels @ 1kHz Rated watts 2ch x 8 ohms: 1550 watts 20ms repetitive burst 1425 watts 1% THD / 1200 watts 0.15% THD, both channels @ 1kHz Dimensions (HxWxD): 3.5” x 19” x 10.5” behind front panel, +0.6” for handle 89mm x 483mm x 267mm behind front panel, +15mm for handle Weight: 14.57lbs / 6.61kg