Skip to content

Powerwerks Tower PA Speaker with Bluetooth ~ 200W

Sold out
Original price £249.00 - Original price £249.00
Original price
£249.00 - £249.00
Current price £249.00
These powered towers have a 3 channel mixer and power amplifier built into the back of the cabinet. The straight forward control panel is easy to navigate even for the novice.

Three input channels with mic, line, aux and Bluetooth® inputs add convenience and flexibility to your live set up. Independent volume controls on each channel and a master control allow you to adjust levels with precision. These controls allow you to bring your sound into focus on each channel. The subwoofer out jack allows bands and DJs to enhance their low end performance by adding a powered sub.

• Built-In 3 Channel Powered Mixer
• 200 Watts Peak Power
• Bluetooth® Connectivity
• Powerlink Circuit for system expansion
• Powerbank for USB power and charging

Peak Power Output 
200 Watts

Accepted Inputs
Channel 1 and Channel 2: Mic XLR Balanced, Line level 1/4 balanced
Channel 3: 1/8" Line level or Bluetooth device

-56 dB: Residual noise, all level controls 0% (minimum)
-48 dB: Nominal system noise, all level controls at 50%
+70 dB: Mic to speaker output (Channel 1 and Channel 2)
+56 dB: Line to speaker output (Channel 1 and Channel 2)
+42 dB: AUX in to speaker output

Channel EQ (Hi, Low)
4kHz and above, 800Hz and below

Powerlink (IN and OUT)
Both jacks accept a balanced input and sends a pre-master volume output mix of channels.
Recommended use: Linking two Powerwerks models

SubWoofer Out
Line out: 20Hz-150 Hz

Monitor Out
Line out: Balanced TRS output with grounded sleeve

Phantom Power
+15 V: Mic input (Channel 1 and Channel 2)

Power Requirements
Europe: 230VAC/50Hz, 80W Nominal
UK: 230VAC/50Hz, 80W Nominal

3 x 6", 8 ohm each

1" Neodymium compression driver

Nominal impedance
Not designed for external speakers

Bluetooth Module Features
Bluetooth 3.0EDR compliant. Typical +2 dBm Class 2 output power.
Audio DAC: 94 dB SNR. A2DP profile support

Top Hat Speaker Connector: 35mm / 1 3/8" diameter

9.4" D x 8" W x 21.7" H  /  240mm D x 205mm W x 550mm H

22.5 lbs  /  10.2 kg