Powerwerks Tower PA Speaker with Digital Effects & Bluetooth® ~ 300W
by Powerwerks
SKU PW3X6BT
Sold out
Original price
£379.00
-
Original price
£379.00
Original price
£379.00
£379.00
-
£379.00
Current price
£379.00
The PW3X6BT is designed for the performer seeking a convenient, portable sound system with uncompromised poer and performance.
These powered speaker towers have a 3 channel mixer and amplifier built into the back of the cabinet. The straight forward control panel is easy to navigate even for the novice. Three input channels with mic, line, AUX, and Bluetooth® inputs add convenience and flexibility to your live set up. Independent volume controls on each channel and a master control allow you to adjust levels with precision. These controls allow you to bring your sound into focus on each channel. The subwoofer line out jack allows bands and DJs to enhance their lowend performance by adding a powered sub.
Features
• 300 Watts Peak Power
• Built-In 3 Channel Powered Mixer
• 24-bit Digital Effects
• Bluetooth® Connectivity
• Powerlink Circuit for system expansion
• Powerbank for USB power and charging
Specifications
Peak Output Power: 300 Watts
Accepted Inputs:
Channel 1 and Channel 2: Mic XLR balanced, line level 1/4 unbalanced
Channel3: 1/8" line level or Bluetooth® device
Hum
+46 dB: Residual noise, all level controls 0% (minimum)
+37 dB: Nominal system noise, all level controls at 50%
System Gain/Speaker Output (Measurements made at 1 kHz)
+49 dB: Mic to speaker output (CH1 & CH2)
+35 dB: Line to speaker output (CH1 & CH2)
+25 dB: AUX in to speaker output
Channel EQ (High, Low)
4 kHz and above, 800 Hz and below
Powerlink (IN and OUT)
Both jacks accept a balanced input and sends a pre-master volume output mix of channels.
Recommended use: Linking two Powerwerks models
Subwoofer Out
Line out: 20 Hz - 150Hz
Monitor Out
Line out: Balanced TRS output with grounded sleeve
Phantom Power
+15 V: Mic input (CH1 and CH2)
Power Requirements
Europe: 230VAC/50Hz, 80W Nominal
UK: 230VAC/50Hz, 80W Nominal
Speakers
3 x 6", 8 ohm each
Horn
1" Neodymium compression driver
Nominal impedance
Not designed for external speakers
Bluetooth Module Features
Bluetooth 3.0EDR compliant. Typical +2 dBm Class 2 output.
Audio DAC: 94dB SNR. A2DP profile support
Top Hat Speaker Connector: 35mm / 1 3/8" diameter
Dimensions
9.5" D x 8" W x 28.75" H
240mm D x 205mm W x 730 H mm
Weight
29 lbs
13 kg
These powered speaker towers have a 3 channel mixer and amplifier built into the back of the cabinet. The straight forward control panel is easy to navigate even for the novice. Three input channels with mic, line, AUX, and Bluetooth® inputs add convenience and flexibility to your live set up. Independent volume controls on each channel and a master control allow you to adjust levels with precision. These controls allow you to bring your sound into focus on each channel. The subwoofer line out jack allows bands and DJs to enhance their lowend performance by adding a powered sub.
Features
• 300 Watts Peak Power
• Built-In 3 Channel Powered Mixer
• 24-bit Digital Effects
• Bluetooth® Connectivity
• Powerlink Circuit for system expansion
• Powerbank for USB power and charging
Specifications
Peak Output Power: 300 Watts
Accepted Inputs:
Channel 1 and Channel 2: Mic XLR balanced, line level 1/4 unbalanced
Channel3: 1/8" line level or Bluetooth® device
Hum
+46 dB: Residual noise, all level controls 0% (minimum)
+37 dB: Nominal system noise, all level controls at 50%
System Gain/Speaker Output (Measurements made at 1 kHz)
+49 dB: Mic to speaker output (CH1 & CH2)
+35 dB: Line to speaker output (CH1 & CH2)
+25 dB: AUX in to speaker output
Channel EQ (High, Low)
4 kHz and above, 800 Hz and below
Powerlink (IN and OUT)
Both jacks accept a balanced input and sends a pre-master volume output mix of channels.
Recommended use: Linking two Powerwerks models
Subwoofer Out
Line out: 20 Hz - 150Hz
Monitor Out
Line out: Balanced TRS output with grounded sleeve
Phantom Power
+15 V: Mic input (CH1 and CH2)
Power Requirements
Europe: 230VAC/50Hz, 80W Nominal
UK: 230VAC/50Hz, 80W Nominal
Speakers
3 x 6", 8 ohm each
Horn
1" Neodymium compression driver
Nominal impedance
Not designed for external speakers
Bluetooth Module Features
Bluetooth 3.0EDR compliant. Typical +2 dBm Class 2 output.
Audio DAC: 94dB SNR. A2DP profile support
Top Hat Speaker Connector: 35mm / 1 3/8" diameter
Dimensions
9.5" D x 8" W x 28.75" H
240mm D x 205mm W x 730 H mm
Weight
29 lbs
13 kg